▄▄▄·▄▄▄ ▄▄▄ .    ▄▄▌ ▐ ▄▄▄▄ .     ▄▄·          ▄▄▌       ▄· ▄▄▄▄ ▄▄▄▄▄
▐█ ▀█▀▄ █▀▄.▀·    ██· █▌▐▀▄.▀·    ▐█ ▌▪    ▪    ██•      ▐█▪██▀▄.▀•██  
▄█▀▀█▐▀▀▄▐▀▀▪▄    ██▪▐█▐▐▐▀▀▪▄    ██ ▄▄▄█▀▄ ▄█▀▄██▪      ▐█▌▐█▐▀▀▪▄▐█.▪
▐█ ▪▐▐█•█▐█▄▄▌    ▐█▌██▐█▐█▄▄▌    ▐███▐█▌.▐▐█▌.▐▐█▌▐▌     ▐█▀·▐█▄▄▌▐█▌·
 ▀  ▀.▀  ▀▀▀▀      ▀▀▀▀ ▀▪▀▀▀     ·▀▀▀ ▀█▄▀▪▀█▄▀.▀▀▀       ▀ • ▀▀▀ ▀▀▀ 
                                ██████╗ 
                                ╚════██╗
                                  ▄███╔╝
                                  ▀▀══╝ 
                                  ██╗   
                                  ╚═╝   
                                        
                     -*- Are We Cool Yet? Presents -*-

###############################################################################
#                                                                             #
#                              <ScARpion 22>                                  #
#                    A 3D Scorpion-esque AR22 Chassis                         #
#                                  v1.0                                       #
#                                                                             #
###############################################################################
#                         /X>  Release Notes  <X\                             #
###############################################################################
#                                                                             #
#                      You: Mom, I want a Scorpion Evo                        #
#                    Mom: We have a Scorpion Evo at home                      #
#                          :Scorpion Evo at Home:                             #
#                                                                             #
#                                    And:                                     #
#                                                                             #
#       Mods: Why TF do people keep putting AR FCGs into everything??         #
#                cursd: LOOK WHAT I PUT INTO THE SCORPION!!                   #
#                                                                             #
#                                    Also:                                    #
#                                                                             #
#                     Know all the laws that can affect you                   #
#                             We arent your lawyers                           #
#                                                                             #
###############################################################################
#                             /X>  Credits  <X\                               #
###############################################################################
#                                                                             #
#                        [-+ Brought to you by: +-]                           #
#                                                                             #
#                             ︻╦╤─ cursd ─╤╦︻                                #
#                                                                             #
#                         [-+ With the help of +-]                            #
#      -detectorist1776 & overanalyze for tons of feedback and working        #
#                          through early beta issues                          #
#       -the_number_15 for beta testing, artwork, and readme assistance       #
#            -eyeliketurtles for beta testing and release videos              #
#            -arohk, chapesMN, and lokiwartooth for beta testing              #
#                                                                             #
#                     [-+ With additional thanks to +-]                       #
#     -351322, InsertMeow, Sc0rp, Vityaz, V8Vtwin for development of the      #
#          AWCY? Scorpion Evo used as the base model for this project         #
#              -Vinh Nguyen for the development of the Deterrence             #
#          Dispensed AR22 Magazine referenced for magazine development        #
#                                                                             #
#  and Entire Are We Cool Yet? team for providing a wonderful R&D environment #
#                                                                             #
###############################################################################
#                         /X>  Non-Printed Parts  <X\                         #
###############################################################################
#                                                                             #
# Barrel Options                                                              #
#    A. Dedicated AR22 barrel w/ dedicated 22LR barrel collar                 #
#    B. AR15 5.56 barrels w/ conversion collar                                #
#    C. AWCY? Tubee22 Barrel w/ conversion collar                             #
# Bolt Options                                                                #
#    A. Atchisson, Ciener, CMMG, or related AR22 Bolt with collar             #
#       compatible with choice of barrel                                      #
# Fire Control Group                                                          #
#    A. AR-15 mil-spec fire control group, safety, and related springs        #
#       and detents                                                           #
#                                                                             #
# Hardware                                                                    #
#    (4) M4x10mm (Handguard Mount)                                            #
#    (4) M4x16mm (Receiver)                                                   #
#    (1) M4x25mm (Receiver)                                                   #
#    (3) M4x35mm (Barrel Retainer & Magazine Release)                         #
#    (10) M4 nuts (Tested with Nylocs)                                        #
#    Compression Spring, 0.5" Long, 0.148" OD, 0.106" ID (Mag Release)        #
#    1/4-28 x 7/8" (AR15 Grip Screw)                                          #
#    Compression Spring, 0.75" Long, 0.188" OD, 0.13" ID (Stock Plate Button) #
#    1/4-28 x 7/8" (AR15 Grip Screw)                                          #
#    Fasteners Springs as Required for Stock or Brace Assembly                #
#      (Refer to AWCY? Scorpion Evo Release)                                  #
#                                                                             #
# Magazine Hardware Options (Compression Springs                              #
#    .6mm WG x 10mm OD x ~180mm L Spring (10 Round Magazine) - Ebay           #
#    .370" OD x .312" ID x .022" WG x 7" (10 Round Magazine) - Black Dog      #
#    .6mm WG x 10mm OD x ~300mm L Spring (~20 Round Magazine) - Ebay          #
#    .370" OD x .312" ID x .022" WG x 12" (~20 Round Magazine) - Black Dog    #
#                                                                             #
###############################################################################
#                         /X>  Printing Notes  <X\                            #
###############################################################################
#                                                                             #
# Coordinate with "Scorpion Parts Compatibility" for parts interchangeable    #
# with the ScARpion 22. Recommend downloading the AWCY? Scorpion Evo release  #
# package and planning out which ScARpion 22 parts will be used in lieu of    #
# Scorpion Evo parts.                                                         #
#                                                                             #
# Filament: PLA+ or stronger                                                  #
# Filament Z(Optional): PLA+ or more heat resistant for barrel retainers      #
# Temp: PLA+: 220 or higher (varies based on specific product used)           #
#       PETG: 230 or higher (varies based on specific product used)           #
#       Stronger or more heat resistant materials (nylon, ABS, PCTG, etc)     #
# Infill: 99-100%                                                             #
# Walls: 10 Minimum                                                           #
# Top/Bottom Layers: 10 Minimum                                               #
#                                                                             #
# Orientation / Supports (all touching build plate only):                     #
#  A. Upper Receivers: 45 deg, nose up, interior down / tree                  #
#  B. Lower Receiver: 45 deg, nose up, interior down / tree                   #
#  C. Barrel Retainers: Flat on bed / none                                    #
#  D. Charging Interface: 45 deg, nose up, interior down / tree               #
#  E. Charging Handle: Flat on bed / none                                     #
#  F. Charging Handle Plug: Flat on bed / none                                #
#  G. Charging Handle Retainer: Flat on bed / none                            #
#  H. Mag Body: Base on build plate / trees                                   #
#  I. Mag Base Plate: 90 deg up, leading face flat on build plate / none      #
#  J. Mag Base Plate: Top of follower face flat on build plate / none         #
#  K. Mag Follower: Top of follower face flat on build plate / none           #
#  L. Mag Locking Plate: Locking nub flat on base plate / any type            #
#                                                                             #
#  M. Optional: Carbine Handguard: 45 deg up, diagonal on bed / none          #
#  N. Optional: Folder Buffer Tube Adapter: Threads vertical / any type       #
#  O. Optional: Modified Folding Stock Body: Tail vertical / any type         #
#  P. Optional: QD Sling Plate Hinge: Bottom flat to bed / tree               #
#  Q. Optional: Two Piece Buttpad - A: Interior flat to bed / TREES           #
#  R. Optional: Two Piece Buttpad - B: Flat to bed / any                      #
#                                                                             #
###############################################################################
#                           /X>  Assembly  <X\                                #
###############################################################################
#                                                                             #
#             Reference PNG images in the respective STL folders.             #
#                                                                             #
# Charging Assembly Bolt Interface                                            #
#  A. Clip bolt interface clips onto top of the bolt recoil assembly          #
#     -extension towards front.                                               #
# Barrel Retainers                                                            #
#  A. Retainer A - Pick file to print based on shoulder diameter of barrel.   #
#     -28.7mm matches the diameter of the pre-2018 Taccom AR22 barrels.       #
#     -Mil-Spec matches diameter of typical 556 barrels, DIY 22LR barrels.    #
#  B. Sleeve retainer flats onto the barrel.                                  #
#     -'A' needs to be sleeved on from muzzle end                             #
#     -'B' and 'C' need to be sleeved on from the breech end.                 #
#     -Use one half of the upper receiver as a jig to for the retainers.      #
#  C. Use (1) M4x35 and (2) M4 nuts for the lower fastening point.            #
#     -Head of the fastener should be snug against face of Retainer 'A'.      #
#     -Nuts should be aligned with flat face of nut on top.                   #
#  D. Use (1) M4x35 and (1) M4 nut for the upper fastening point.             #
#     -Head of the fastener should be snug against face of Retainer 'A'.      #
# Lower Receiver                                                              #
#  A. Install AR FCG and grip, reaming out holes as required for snug fit.    #
#     -'A' needs to be sleeved on from muzzle end                             #
#     -'B' and 'C' need to be sleeved on from the breech end.                 #
#     -Use one half of the upper receiver as a jig to for the retainers.      #
#  B. Install Mag Release with (1) M4x35, (1) M4 nut, and .148" OD spring     #
# Upper Receiver                                                              #
#  A. Insert Barrel and Bolt into Upper Receiver half. Hand fitting of barrel #
#     retainers may be required depending on printing orientation of uppers   #
#     and printer calibration.                                                #
#  B. Fasten Upper Receiver halves together using the assorted M4 fasteners.  #
#     -M4x16 along the top                                                    #
#     -M4x40 adjacent the barrel                                              #
#     -M4x25 at the butt                                                      #
#      -Insert stock plate button & spring and hold in place while fastening. #
# Lower to Upper                                                              #
#  A. Align hole at front of lower with the 2 M4 nuts protruding from the     #
#     barrel retainer and insert. Fasten the takedown bolt with the M4x40.    #
# Handguard and Charging Handle                                               #
#  A. Insert charging handle (red) into charging handle channel.              #
#  B. Take the charging handle plug (black, small piece with the triangle)    #
#     and orient the "rod" perpendicular to the charging handle with the      #
#     triangle facing away from the handle.                                   #
#  C. In the charging handle slot, there is a hole that runs perpendicular to #
#     the charging handle connecting the two slots. Insert the chargin handle #
#     plug through that hole. This retains the charging handle.               #
#  D. Orient the charging handle retainer (green) with the "C" shape facing   #
#     the muzzle, parallel to the charging handle. The pin hole should face   #
#     outwards.                                                               #
#  E. On the opposite side of the handguard, there is a slot that is used by  #
#     the charging handle to hold the bolt open. Insert the charging handle   #
#     retainer in the channel.                                                #
#  F. Use a paper clip or fastener to push the charging handle retainer       #
#     towards the muzzle through the channel until it clips onto the rod end  #
#     of the charging handle plug that is protruding out.                     #
# Plate Hinge to Upper                                                        #
#  A. Depress button and slide plate hinge onto onto butt of upper.           #
# Stock and Brace Assemblies                                                  #
#  A. Refer to AWCY? Scorpion Evo release package.                            #
# Magazine (10 Round, ~20 Round)                                              #
#  A. Insert follower into mag body with post towards base of magazine.       #
#  B. Insert mag spring into mag body, chasing follower.                      #
#  C. Insert locking plate, chasing mag spring. Hold in place.                #
#  D. While holding locking plate in, slide baseplate onto mag body.          #
#                                                                             #
###############################################################################
#                  /X>  Scorpion Parts Compatibility  <X\                     #
###############################################################################
#                                                                             #
# Handguards                                                                  #
#  A. Compatible:                                                             #
#     -AWCY? Scorpion Evo FREE FLOAT Pistol and Micro Handguards              #
#  B. NOT Compatible:                                                         #
#     -CZ OEM Barrel Nut Mounted Pistol and Micro Handguards                  #
#     -HBI Scorpion Evo Free Float Handguards                                 #
#     -AWCY? Scorpion Evo BARREL NUT MOUNTED Pistol and Micro Handguards      #
#     -AWCY? Scorpion Evo HBI Free Float Pistol and Micro Handguards          #
# Stock Plate Hinge                                                           #
#  A. Compatible:                                                             #
#     -AWCY? Scorpion Evo Stock Plate Hinge                                   #
#     -CZ OEM or aftermarket Stock Plates or Adapters                         #
#  B. NOT Compatible:                                                         #
#     -None known                                                             #
# Stocks and Braces                                                           #
#  A. Compatible:                                                             #
#     -All AWCY? Scorpion Evo Folding Stocks and Braces. See full AWCY?       #
#      Scorpion Evo release package.                                          #
#  B. NOT Compatible:                                                         #
#     -None known                                                             #
#  C. Other:                                                                  #
#     -QD Sling Stock Plate Hinge: utilizes the standard Scorpion Evo folding #
#      mechanism. Adds QD mounting sling mount point. Minor aesthetic changes.#
#     -Folding Buffer Tube Adapter: utilizes the standard Scorpion Evo folding#
#      mechanism. Compatible with any buffer tubes that thread into an AR-15  #
#      lower receiver. Will not fold flat against receiver body.              #
#     -Tall Folding Stock Body: profile revised to match the increased height #
#      of QD Sling Stock Plate Hinge.                                         #
#     -Two Piece Buttpad: compatible with AWCY? Scorpion Evo stock. Modified  #
#      for printing with non-flexible plastics for those that do not or cannot#
#      print TPU or other flexible materials for the standard buttpad.        #
# Magazine Release                                                            #
#  A. Compatible:                                                             #
#     -AWCY? Scorpion Evo Magazine Releases. See full AWCY? Scorpion Evo      #
#      release package.                                                       #
#  B. NOT Compatible:                                                         #
#     -None known                                                             #
# Grips                                                                       #
#  A. Compatible:                                                             #
#     -All AR-15 type grips that do not have an overmolded beaver tail.       #
#     -Recommend: FFFTech printed grips @ https://odysee.com/@FFFTech:3       #
#  B. NOT Compatible:                                                         #
#     -AR-15 type grips that have an overmolded beaver tail.                  #
#                                                                             #
###############################################################################
#                -`-,-{@  AWCY? - Stronger Together  @}-,-`-                  #
#                         (oven appreciation group)                           #
#                  Join us at: https://www.AreWeCoolYet.WTF                   #
###############################################################################