###############################################################################
# Readme: AWCY? Insertmeow(IMA) Scorpion PSA Style Magazines (20rd & 35rd)    #
#  Thanks to Sc0rp & V8Vtwin and many others from AWCY group with their       #
#              help testing this magazine in its development.                 #
#                                                                             #
# In testing one version of the PSA 35rd magazine in PLA+ has had 2000 rounds #
#    fired through it with no problems feeding or damage to feed lips.        #
#                   (still using this mag as of release)                      #
#                                                                             #
#                              Parts needed:                                  #
#                                  35rd:                                      #
#              1x CZCustom extended mag spring cut to length                  #
#             (https://czcustom.com/evo-mag-ext-spring.html)                  #
#                   [trim extra coils off if too stiff]                       #
#                                    or                                       #
#               1x Extended (~30rd) glock 17 magazine spring                  #
#                                                                             #
#                                  20rd:                                      #
#               1x CZCustom extended mag spring cut in half                   #
#             (https://czcustom.com/evo-mag-ext-spring.html)                  #
#                   [trim extra coils off if too stiff]                       #
#                                    or                                       #
#                  1x Glock 17 (17-20rd) magazine spring                      #
#                                                                             #
#    Basic print profile suggested and proven to work well in testing         #
#                           Esun PLA+ or Better                               #
#                             Nozzle 220-230C                                 #
#                                Bed 50-60C                                   #
#                               Speed 50mm/s                                  #
#                   Minimum 5 walls, the more the better                      #
#                           Infill 98-99% gyroid                              #
#                    Supports: Recommend tree supports                        #
#   (add support blockers to stippled areas for cleaner surface finish)       #
#                                                                             #
#                            Print Orientation:                               #
#                                Mag Body:                                    #
#  Print mag body with base (bottom) on print bed (vertically, nice and tall) #
#                                End Plate:                                   #
#                    Print with large flat on print bed                       #
#                              Mag Follower:                                  #
#              Print on front side or bottom toward print bed                 #
#                               Lock Plate:                                   #
#            Print with button or spring side toward print bed                #
#                                                                             #
#                                Assembly:                                    #
# 1. Ensure all parts are cleaned of supports and print artifacts             #
#    (file mating surfaces a tiny bit if too snug).                           #
# 2. Ream/clean up last round hold open hole on mag body, so that the         #
#    mag follower's last round hold open tab moves freely in it.              #
#    (Optional: lube internals of mag body with dry ptfe lubricant            #
#    to help ensure smooth feeding)                                           #
# 3. Insert mag follower into mag body.                                       #
# 4. Insert spring (jiggle around a tiny bit to ensure it is in position)     #
# 5. Insert lock plate into end of spring sticking out of mag body.           #
# 6. Compress spring with lock plate and slide end plate into its interface   #
#    on the bottom of the mag body.                                           #
# 7. Congrats on the super cheap and very dependable magazine.                #
###############################################################################