If the model shows up tiny in your slicer, Please scale by 2540%
The Drophook uses the same Doge_Tailhook_PartB as the regular tailhook.

Parts needed *Not mentioned in Logsleeve's readme


***tailhook nut** (goes in small tailhook part): 
1/4x20 Nylon-Insert nut (McMaster part # 90630A110)                           
***tailhook end-screw** (secures the 2 tailhook parts together)         
1/4x20 x 1 1/8 Button Head Screw (McMaster part # 92949A835)        


Credits

*** Logsleeve
*** Insertmeow
*** Dogenado   
*** Sc0rp