I looked every where and could not find a specific JIG that makes Torsion springs so I had to design my own, this works both clockwise and counter clockwise and works flawlessly with a 100% success rate. I have given you three sizes to choose from 6,8 & 10mm and I'll be adding more on a later date, you will only require one handle for all 3 jigs. 



Items Requires:

JIG:

1 X CONNECTOR NUT (2mm BIGGER THAN YOUR JIG SIZE)

1 X M6, M8, M10 (DEPENDING ON THE JIG)

2 X M5 WELD NUTS

2 X M5 HEX BOLT

2 X PLATES (USE THE TEMPLATE TO CUT OUT OF 2mm STEEL)

1 X WASHER 2MM THICK



HANDLE:

1 X M10 HEX BOLT X  L (FOR THE GRIP)

2 X M10 NUTS

1 X M5 WELD NUTS

1 X M5 HEX BOLT



!!!Note: I'm always open for suggestion and help on improving the design and proof of concept.



!Don't forget to check out my other Cool designs and Follow my Weekly dose of KooKoo uploads, Enjoy ;)