Glock Rear Sight Drift Block by FFFTech/FFFTechnology

A block for drifting the rear sight via hammer and punch from a Glock slide. The rear sight 
can removed from either side of the slide, as the block has channels on either side to 
accommodate. Designed around the Glock 17 Gen 4 Slide; though should hold Glock 19, 26, and 
other slides with the same overall width and height dimensions as well. 


Printer Used: Monoprice Maker Select Plus

Filament Used: PLA+

Print Settings:

Extruder: 205C 
Bed: 56C 
First Layer Print Height: .24mm 
Standard Layer Height: .2mm
Wall Thickness: .40 
Wall Perimeters: 3
Infill: 25%
Infill Pattern: Gyroid
Material Flow: 100%